ZyXEL Communications ZyWALL USG 100 Series - Page 970

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
970
DNS access control
rule %u has been moved
to %d.
An administrator moved the rule %u to index %d.
%u is previous index
%d variable is current index
The default record of
Zone Forwarder have
reached the maximum
number of 128 DNS
servers.
The default record DNS servers is more than 128.
Interface %s ping
check is successful.
Zone Forwarder adds
DNS servers in
records.
Ping check ok, add DNS servers in bind.
%s is interface name
Interface %s ping
check is failed. Zone
Forwarder removes DNS
servers in records.
Ping check failed, remove DNS servers from bind.
%s is interface name
Interface %s ping
check is disabled.
Zone Forwarder adds
DNS servers in
records.
Ping check disabled, add DNS servers in bind.
%s is interface name
Wizard apply DNS
server failed.
Wizard apply DNS server failed.
Wizard adds DNS server
%s failed because DNS
zone setting has
conflictd.
Wizard apply DNS server failed because DNS zone conflicted.
%s is the IP address of the DNS server
Wizard adds DNS server
%s failed because Zone
Forwarder numbers have
reached the maximum
number of 32.
Wizard apply DNS server fail because the device already has
the maximum number of DNS records configured.
%s is IP address of the DNS server.
Access control rules
of %s have reached the
maximum number of %u
The maximum number of allowable rules has been reached.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
%u is the maximum number of access control rules.
Access control rule %u
of %s was appended.
A new built-in service access control rule was appended.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %u
of %s was inserted.
An access control rule was inserted successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Table 293 Built-in Services Logs (continued)
LOG MESSAGE DESCRIPTION