ZyXEL Communications ZyWALL USG 100 Series - Page 983

Appendix A Log Descriptions
ZyWALL USG 100/200 Series User’s Guide
983
Register SIP ALG
signal port=%d failed.
SIP ALG apply signal port failed.
%d: Port number
Register H.323 ALG
extra port=%d failed.
H323 ALG apply additional signal port failed.
%d: Port number
Register H.323 ALG
signal port=%d failed.
H323 ALG apply signal port failed.
%d: Port number
Register FTP ALG extra
port=%d failed.
FTP ALG apply additional signal port failed.
%d: Port number
Register FTP ALG
signal port=%d failed.
FTP ALG apply signal port failed.
%d: Port number
Table 299 PKI Logs
LOG MESSAGE DESCRIPTION
Generate
X509certifiate "%s"
successfully
The router created an X509 format certificate with the
specified name.
Generate X509
certificate "%s"
failed, errno %d
The router was not able to create an X509 format certificate
with the specified name. See Table 292 on page 985 for
details about the error number.
Generate certificate
request "%s"
successfully
The router created a certificate request with the specified
name.
Generate certificate
request "%s" failed,
errno %d
The router was not able to create a certificate request with
the specified name. See Table 292 on page 985 for details
about the error number.
Generate PKCS#12
certificate "%s"
successfully
The router created a PKCS#12 format certificate with the
specified name.
Generate PKCS#12
certificate "%s"
failed, errno %d
The router was not able to create anPKCS#12 format
certificate with the specified name. See Table 292 on page
985 for details about the error number.
Prepare to import "%s"
into "My Certificate"
%s is the name of a certificate request.
Prepare to import "%s"
into Trusted
Certificate"
%s is the name of a certificate request.
CMP enrollment "%s"
successfully, CA "%s",
URL "%s"
The device used CMP to enroll a certificate. 1st %s is a
request name, 2nd %s is the CA name, 3rd %s is the URL .
CMP enrollment "%s"
failed, CA "%s", URL
"%s"
The device was unable to use CMP to enroll a certificate. 1st
%s is a request name, 2nd %s is the CA name, 3rd %s is the
URL
Table 298 NAT Logs (continued)
LOG MESSAGE DESCRIPTION