3DHISTECH Pannoramic SCAN II - Page 115

Pannoramic SCAN II 2.2.0 User’s Guide 5.6.1 Settings
▪ Camera Changer
▪ DFP Light
▪ Filter Wheel
▪ General
▪ Halogen Light
▪ Microscope Part
▪ Midi Loader
▪ ND
▪ Objective Changer
▪ Preview Light
▪ RGB Light
▪ Relay
▪ Scan Loader
▪ Service
▪ Shutter
▪ Slide Scanner
▪ Stage
◦ Software log
All of the circumstances and states of the slide scanning procedure is saved. LogID is the
sequence number of scanning performed on the scanner in use. (Profile Name,
Illumination mode, Scan type, Scan Start, Scan Finished, URL, Error)
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 115(156)