Pannoramic SCAN II 2.2.0 User’s Guide 4.2 Main window functions
– Take All Previews
Each preview of slides in the magazine is taken automatically. Preview types are the following:
• - Brightfield
• - Pre-Scan (FL)
• - Pre-Scan High-Resolution (FL)
• - Pre-Scan + High-Resolution (FL)
Figure 16 – Take all preview selector
Activate Retake Preview for all the slides in the magazine if necessary. This operation can be initiated
from the slide preview window as well. The scanner software automatically saves the preview image
of a slide that is loaded into the scanner and of which a preview image is recorded.
Whenever you add a new magazine (in Planner mode as well) the software asks you whether the
magazine has previously been loaded or not. Click Yes if the magazine has already been processed,
then enter the number of the magazine used during the process, otherwise click No.
– Auto attach
Actual profile is assigned to the loaded slide automatically.
January 24, 2020 - Rev. 2 3DHISTECH Ltd. 49(156)
To Next Page
Loading...
