4RF Aprisa LTE - Page 111

Managing the LTE | 111
Aprisa LTE User Manual 2.1
Delete
This deletes the interface.
Add New Interface
Interface Name
This parameter sets the name of the interface up to 15 chars.
Protocol
This parameter sets the protocol used on the interface. The default setting is Static Address.
Option
Function
Static Address
Allows assignment of one or more IPv4 and/or IPv6 static
addresses, along with manual configuration of default gateway.
DHCP Client
Allows automatic configuration of IPv4 address, netmask, gateway
and DNS servers through the DHCP protocol.
DHCPv6 Client
Allows automatic configuration of IPv6 from any combination of
stateless DHCPv6, stateful DHCPv6, DHCPv6-PD and SLAAC.
Create a bridge over multiple interfaces
If this parameter is selected, a bridge (virtual switch), can be created by selecting multiple physical
interfaces.