LTE Product Overview
The 4RF Aprisa LTE is a 3GPP LTE router for critical infrastructure monitoring and control for smart SCADA
(e.g. electricity, water, oil and gas industries), transportation, smart city, backhaul, and industrial
communication hardened for both mission and business critical applications.
Key Features
• LTE wireless data services providing broadband enhanced LTE data rates and latency
• Supports strong CSNA complaint encryption, authentication and hashing algorithms (eg RSA4096 and
SHA384).
• GRE VPN, and IPSec support, the Aprisa LTE protects against vulnerabilities and malicious attacks
• Serial and Ethernet ports with an SFP port for additional electrical / optical connection
• Integrates into a wide range of industrial and utility applications with redundant carrier connections
for public and private networks
• Mobility and Wi-Fi supporting advanced remote visibility in vehicle networks with GNSS location
• GNSS navigation and 2x2 MIMO Wi-Fi access point/client for robust workforce mobility and
communication
• Advanced L2 / L3 capabilities: selectable L2 or L3 modes with VLAN, QoS, NAT, IPv4, and IPv6
• Transition support to maximize performance and prioritize mission critical traffic while meeting
tough security and IP network policy imperatives
• A wide temperature range using full specification industrially rated components and shared Aprisa
family heritage
• Easily managed with SuperVisor GUI local element management via HTTPS
• Element management over the air via SNMP to allow network-wide monitoring
• Control, and orchestration via a variety of supported third party network management systems
• Failover: single LTE router, dual SIM with switch over, and interface failover to provide alternate
path routing on WAN or FAN failure
To Next Page
Loading...
