66 | Aprisa LTE User Manual
Login to SuperVisor
If SuperVisor is inactive for a period defined by the SuperVisor Inactivity Timeout option (see ‘Services >
SuperVisor’ on page 150), the LTE router will automatically logout the user.
To login to SuperVisor:
1. Open your web browser and enter the IP address of the LTE router.
If you haven’t assigned an IP address to the LTE router, use the factory default IP address of 192.168.4.1
with a subnet mask of 255.255.255.0.
The Aprisa LTE has a randomly generated unique self-signed ECC256 security certificate which may cause
the browser to prompt a certificate warning. The valid certificate is ‘Issued By: 4RF-APRISA’ which can be
viewed in the browser.
When connecting to a remote device for first time, you should manually load the certificate before
connecting. Once you have added the exception to your browser, if a warning is shown again it may indicate
a ‘man in the middle attack’.
2. Login with the Username and Password assigned to you.
If unique usernames and passwords have not yet been configured, use the default username ‘admin’ and
password ‘admin’.
If the login fails, the pop-up will be displayed.
To Next Page
Loading...
