SuperVisor Management Overview
Connecting to SuperVisor
The recommended management connection to the Aprisa LTE router is with an Ethernet interface using
standard IP networking.
The Aprisa LTE has a factory default IP address of 192.168.4.1 with a subnet mask of 255.255.255.0.
To change the Aprisa LTE IP address:
1. Set up your PC for a compatible IP address e.g. 192.168.4.100 with a subnet mask of 255.255.255.0.
2. Connect your PC network port to one of the Aprisa LTE Ethernet ports.
3. Open a browser and enter 192.168.4.1.
4. Login to the LTE router with the default username ‘admin’ and password ‘admin’.
5. Go to ‘Interfaces/Networking > Logical Interfaces’ on page 109, the LAN tab to change the IP address
to conform to the network plan in use.
To Next Page
Loading...
