EasyManua.ls Logo

4RF Aprisa LTE - Power Supply; Tamper Protection

4RF Aprisa LTE
248 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction | 39
Aprisa LTE User Manual 2.1
Power Supply
The Aprisa LTE provides power supply options:
Power Supply
Function
Part Number Option
V
932 VDC neg earth input power
APLT-M001-N01-P0-V0-T0A0
W
(future power option)
APLT-M001-N01-P0-W0-T0A0
Tamper Protection
The Aprisa LTE provides a tamper protection option:
Option
Function
Part Number Option
0
No tamper protection fitted to the LTE
APLT-M001-N01-P0-V0-T0A0
1
Tamper Protection fitted to the LTE
APLT-M001-N01-P0-V1-T0A0
The Aprisa LTE tamper protection provides electronic and physical tamper detection to prevent
unauthorized LTE operation and access to stored information.
If a tamper is detected, this device will immediately erase the encryption key in the battery backed tamper
protected memory. Factory default settings are immediately loaded, and a tamper event is added at the
next boot.
It uses a pluggable 3V lithium battery to power the tamper circuits while the router is not powered.
CAUTION:
- There is a risk of fire or explosion if the lithium battery is replaced by an incorrect type.
- Disposal of a lithium battery into fire or a hot oven, or mechanically crushing or cutting of the battery
can result in an explosion.
- Leaving a lithium battery in an extremely high temperature surrounding environment that can result in
an explosion or the leakage of flammable liquid or gas.
A lithium battery subjected to extremely low air pressure that may result in an explosion or the leakage
of flammable liquid or gas.

Table of Contents

Other manuals for 4RF Aprisa LTE