Aprisa LTE User Manual 2.1
5. Alarm Events
Alarm Events
Only logged if authentication passes.
Contains details of received message
SMS Authentication Failed
Message similar to “SMS From failed authentication”
When cellular modem is not responding
This alarm is raised if a PDN profile is configured for a SIM card
that is not present.
Alarm shall not be raised for empty slot if it is not configured.
Cell Not Registered on
Network
When cell network registration fails
When cellular goes on roaming
Raised when SIM card has rejected the configured PIN
Raised when SIM card has entered PUK lock state
Text will indicate what PDN/Network has failed, and what is
becoming active
When RSSI is lower or higher than configured thresholds
When RSRP is lower or higher than configured thresholds
When RSRQ is lower or higher than configured thresholds
When SNR is lower or higher than configured thresholds
When SINR is lower or higher than configured thresholds
Daily Usage Exceeded SIMx
When combined TX+RX byte count is exceeded for SIMx in current
day (rolling over at 0:00 each day)
Weekly Usage Exceeded
SIMx
When combined TX+RX byte count is exceeded for SIMx in current
week (rolling over at 0:00 on monday)
Monthly Usage Exceeded
SIMx
When combined TX+RX byte count is exceeded for SIMx in current
month (rolling over at 0:00 on configured month start day)
When RX bytes received on SIMx outside configured trigger
upper/lower in configured duration.
Alarm is cleared if values within clear upper/lower.
If max is 0 it is ignored
When RX packets received on SIMx outside configured trigger
upper/lower in configurable duration.
Alarm is cleared if values within clear upper/lower.
If max is 0 it is ignored
When TX bytes sent on SIMx exceed configured trigger upper/lower
in configurable duration.
Alarm is cleared if values within clear upper/lower.
If max is 0 it is ignored
When TX packets sent on SIMx exceed configured trigger
upper/lower in configurable duration.
Alarm is cleared if values within clear upper/lower
If max is 0 it is ignored
When no data is received during the configured period