4RF Aprisa LTE - Events > Alarm I;O Setup

202 | Aprisa LTE User Manual
Events > Alarm I/O Setup
This page provides control of the hardware alarm input and hardware alarm output provided on the power
connector.
The alarm inputs can be used for the following functions:
• Programmable ignition turn on and turn off
• Input sensing for externally triggered alarms
The alarm outputs can be used to interconnect to Aprisa SR and SR+ radio alarm inputs.
ALARM PORTS
Name
The alarm IO number.
Type
The Type shows if the alarm is an input or output.
Active State
The Active State parameter sets the alarm state when the alarm (or ignition input if that is enabled) is
active.