4RF Aprisa LTE - Software > Setup

Managing the LTE | 209
Aprisa LTE User Manual 2.1
Software > Setup
This page provides the setup of the USB flash drive containing a Software Pack.
USB SETUP
USB Boot Upgrade
This parameter determines the action taken when the router detects a USB flash drive in the Host port,
either at power on, or when inserted at any time. The default setting is ‘Load Only’.
Option
Function
Load and Activate
New software will be loaded from a USB flash drive in to the Aprisa
LTE and activated automatically.
Load Only
New software will be loaded from a USB flash drive in to the Aprisa
LTE. The software will need to be manually activated (see
‘Software > Manager’ on page 212).
None
Software will not be loaded from a USB flash drive into the Aprisa
LTE.