4RF Aprisa LTE - Interfaces;Networking > Ethernet

94 | Aprisa LTE User Manual
Interfaces/Networking > Ethernet
This page provides setup of the Ethernet port parameters.
ETHERNET PORT SETTINGS
Name
This parameter sets the port name which can be up to 32 characters. This name is only to aid customer and
is not used by the LTE other than for display.
Mode
This parameter controls the enable/disable of the Ethernet port. The default setting is Standard.
Option
Function
Standard
Ethernet Port is in standard operation
Disabled
Ethernet port is disabled. Useful when the port is unused or
when user would like to save in power consumption
Speed (Mbit/s)
This parameter controls the traffic rate of the Ethernet port. The default setting is Auto.
Option
Function
Auto
Provides auto selection of Ethernet Port Speed
10/100/1000 Mbit/s