4RF Aprisa LTE - Page 211

Managing the LTE | 211
Aprisa LTE User Manual 2.1
FILE TRANSFER STATUS
Transfer Activity
This parameter shows the status of the transfer, ‘Idle’, ‘In Progress’ or ‘Completed’.
Method
This parameter shows the file transfer method.
File
This parameter shows the software file source.
Transfer Result
This parameter shows the progress of the transfer:
Transfer Result
Function
Starting Transfer
The transfer has started but no data has transferred.
In Progress (x %)
The transfer has started and has transferred x % of the data.
Successful
The transfer has finished successfully.
File Error
The transfer has failed.
Verification Failed
The transfer completed, but the file was not valid.
Check that the file uploaded was an Aprisa LTE software upgrade
file.
Note: To check that the Aprisa LTE software upgrade file (4nu) is valid, obtain the checksum (sha1) file for
that software release contained in the Software Release zip file on the 4RF website
https://www.4rf.com/secure.
On windows open a command prompt and type ‘certutil -hashfile <updatefile>.4nu SHA1’. Next open the
sha1 file in a text editor such as notepad and confirm the hashes match.
On linux type ‘sha1sum -c <updatefile>.sha1’ and check that the output contains ‘OK’.