4RF Aprisa LTE - Page 213

Managing the LTE | 213
Aprisa LTE User Manual 2.1
PREVIOUS SOFTWARE
Version
This parameter displays the software version that was running on the device prior to the current software
being activated.
Status
This parameter displays the status of the software version that was running on the device prior to the current
software being activated (always inactive).
Activate
This parameter activates the previous software version (restores to previous version).
The device will automatically reboot after activation.
AVAILABLE SOFTWARE PACK
Version
This parameter displays the software pack version available.
Status
This parameter displays the status of the software pack version.
Option
Function
Available
The software pack is available for use.
Activating
The software pack is activating in the device.
Unavailable
There is no software pack loaded into the device.
Activate
This parameter activates the software pack.
The device will automatically reboot after activation.
To activate a software version:
1. Tick the software version required to be activated (previous software or software pack).
2. Click ‘Apply’.
The page will display a Status of ‘Activating’.
Once started, activation cannot be cancelled.
When the activation is completed, the device will reboot. This will cause the current SuperVisor session to
expire.
3. Login to SuperVisor to check the result.