4RF Aprisa LTE - Page 230

230 | Aprisa LTE User Manual
Configure Commands
Command Option
Usage
Maximum Access
do
Allows execution of any non-configure view
command
All
unlock <code>
Unlocks factory mode commands
Admin only
commit
Once all the changes have been made, they can be
committed using the “commit” command. If there is
an error during the commit due to missing data,
conflicting settings, or other issue, then none of the
changes will be committed and the CLI will provide
feedback regarding the error.
Successful commit saves configuration to
configuration database.
Technician and
above
discard
Discard uncommitted changes
Technician and
above
apply
Applies changed configuration to running system.
Does not save changes.
Technician and
above
exit
Exit the configuration mode / exit one level of
configuration and go to parent configuration level
exit
hostname <name>
Sets hostname to specified value
hostname
<name>
supervisor [httpport xx] [httpsport
xx] [redirect on|off]
Configures supervisor listen ports for http, https.
Each parameter is optional, and if omitted the value
does not change.
no supervisor httpport
no supervisor httpsport
Disables supervisor on http or https
cellular modem carrier preferred
<xxx>
Set the preferred carrier
Engineer and
above
cellular modem reset
Resets the modem
Technician and
above
cellular sim enable-lock
Enables the SIM PIN lock function
Engineer and
above
cellular sim disable-lock
Disable the SIM PIN lock function
Engineer and
above
cellular sim puk-unblock <puk>
<newping>
Unblocks a SIM if it is in blocked state.
Engineer and
above
cellular sim change-pin <old> <new>
Changes the SIM PN
Engineer and
above
cellular pdn lock <index> timer
<delay>
Locks specified PDN for specified period
Engineer and
above
no cellular pdn lock
Disables the PDN lock
Engineer and
above
logclear
Clears all entries from the Event History Log
Admin only