Max TX Channel Rate
Displays the maximum transmit channel rate - 50 or 100 Mbit/s depending on the LTE module installed (see
‘LTE Modules’ on page 38).
Max RX Channel Rate
Displays the maximum receive channel rate - 300 or 600 Mbit/s depending on the LTE module installed (see
‘LTE Modules’ on page 38).
Supported Bands
Displays the list of bands supported by the installed LTE module and the carrier (see ‘LTE Modules’ on page
38).
Enabled Bands
Displays the list of bands enabled in this LTE (see ‘Cellular > General’ on page 83).
Carrier Aggregation
When enabled, allows carrier aggregation to take place.
Modem State
Displays the cellular modem state. The values can be; Failed, Unknown, Initializing, Locked, Disabled,
Disabling, Enabling, Enabled, Searching, Registered, Disconnecting, Connecting, Connected.
Fail Reason
Displays the reason for modem failure. If for some reason modem failed connection to network, then the
reason is stated here.
To Next Page
Loading...
