System Functions and Features as of I7.9
Routing elements 111
syd-0200/3.0 – I7.9 – 11.2009
4. 7. 3. 1 User Groups 14, 15 and 16
After initialization, the element Operator Console and the first four users are en-
tered as members in a user group 16.
After an initialization each trunk group is allocated call distribution element 1. It is
allocated user group 16 as the destination for all three switch positions.
User group 16 is used as the destination in the following cases:
• No suitable DDI number is found for an incoming call and call distribution
element 1 is entered in the trunk group configuration.
• An incoming call reaches a busy user group, triggers call waiting and call waiting
is rejected.
• An incoming call is routed to a Voice Mail system via the Voice Mail user group,
and the system is out of order due to a fault.
Tip:
As the user group is used as an emergency routing destination, the
elements or members configured in this user group must be suitable
as alternative destinations.
4. 7. 3. 2 User group 14, 15 and 16
1)
• User group 16 is reserved for Capolinea destination 1 and 2.
• User group 14 is reserved for Capolinea destination 3.
• User group 15 is reserved for the switching variant of Capolinea destination 1
and 2 (see "Capolinea", page 120).
1)
For Italy only
To Next Page
Loading...
