System Functions and Features as of I7.9
388 Features
syd-0200/3.0 – I7.9 – 11.2009
8. 6. 3 End-of-selection signal
The input of an external number can be completed with the character #. The PBX
(or network system) interprets this as the end of selection and immediately
switches through.
Detailed Description
Dialling with end-of-selection signal is important in several cases:
• when dialling an external number in an open numbering plan (Fig. 187,
page 388).
• when the LCR (Least Cost Routing) function is activated: In this case the PBX has
to wait until the user has entered all the digits before it can forward the com-
plete number to the network provider configured. The end-of-selection signal
does not require any additional waiting time (Fig. 188, page 389).
• With SIP terminals on a PBX and a PBX connected via an SIP provider to the pub-
lic network. Without end-of-selection the waiting time is 4 seconds.
Fig. 187 Dialling with end-of-selection signal
.ETWORK
.ETWORK
SYSTEM
0"8
HAZAAENA
To Next Page
Loading...
