System Functions and Features as of I7.9
Call logging (CL) 265
syd-0200/3.0 – I7.9 – 11.2009
7. 7 Output formats
An output format defines which call data is to be output in which format. The fol-
lowing output formats are available:
Formats PC1 to PC5
Used for output on a PC. The PC5 format is the most comprehensive PC format and
is recommended for all systems upgraded with a new PC application for the acqui-
sition and evaluation of call data. The PC5 format contains ICL and OCL data (see
page 266).
Formats PC1 to PC4 are still supported for PC applications that are already in opera-
tion. However, these formats are not suitable for PINX in a private network. There is
a separate ICL and OCL variant for each of the formats PC1 to PC4 (see page 293).
Protocol format
This format is used for output on a printer. It does not contain all the data of the PC
formats. There is a separate ICL and OCL variant for the Protocol format (see
page 289).
Individual receipt format
This format is used to print out individual call charges as a receipt. The individual
receipt format is available for OCL only (see page 292).
Output format OIP
The OIP format is used for sending call data from the PBX to the OIP server. The for-
mat is based on the PC5 format but contains additional information. On the OIP
side, the Call Logging Driver (internal OIP service) is the interface adapter for ac-
cessing the charge data interface. For detailed information, please refer to the
Open Interfaces Platform System Manual.
To Next Page
Loading...
