System Functions and Features as of I7.9
Features 409
syd-0200/3.0 – I7.9 – 11.2009
8. 6. 13 Message function
A MESSAGE can be sent from any terminal to all system terminals. Depending on
the terminal the receipt of a MESSAGE is signalled by a callback request.
Fig. 198 Activate MESSAGE
Detailed Description
Tab. 240 Activate MESSAGE
Number of callback requests:
The number of callback requests that can be stored depends on the terminal.
Display priority:
External alarm messages have maximum priority. Callback requests are displayed
with a higher priority than Voice Mail notifications and text messages.
Tip:
With the MESSAGE function a user has the possibility of activating several
callbacks simultaneously, depending on his terminal.
Interface
Operating sequence / signalling on the ter-
minal
Scope
A Once the procedure has been executed, A
obtains the acknowledgement tone.
Requirement:
The activating user A must be authorized to
use this function.
B • System terminals with display: Text mes-
sages, attention tone, LED display
• Office 10: LED display only
Possible interfaces:
Internal
Requirement:
System terminal
A
B
haz0603aaena0
"MESSAGE"
To Next Page
Loading...
