System Functions and Features as of I7.9
Features 467
syd-0200/3.0 – I7.9 – 11.2009
8. 7. 9 Home alone
If calls to a user group can only be answered by one user, that user can activate the
Home Alone feature on the user group.
If the user is then making a call, all other internal or external callers to the user
group will obtain the congestion tone.
If the user in the user group is assigned several terminals, the parameter Busy if busy
must be configured to Yes for that user.
Detailed Description
Tab. 314 Home alone
• A UG with activated Home Alone is busy if at least one of the UG’s users is in an
outside call or an internal call.
• If a user is in several line groups with “Home Alone” activated and if he is in a call,
callers to one of the UGs will obtain “busy”.
Prefix Dialling Procedures
Tab. 315 User group: Procedures
System configuration
Tab. 316 Home alone System configuration
Operating sequence / signalling on the terminal Scope
• The user obtains an acknowledgement tone in each case when activat-
ing/clearing Home Alone.
• If the function is configured on a key with LED display, the status will be
displayed. The LED lights up when the feature is activated.
*/# procedure
Activate Home Alone *49 UG No.
Clear Home Alone #49 UG No.
Parameter Parameter value Remarks
Home alone Yes CM_2_1_5
Busy if busy Yes CM_3_2_5
To Next Page
Loading...
