Aastra Ascotel IntelliGate A150 - Call Logging and Data Protection; Examples of LCR

System Functions and Features as of I7.9
196 Call routing
syd-0200/3.0 – I7.9 – 11.2009
5. 6. 9 Call logging and Data Protection
In connection with the LCR function, the OCL output format PC5 (recommended)
or PC4 must be used (see "Output formats", page 265).
When the data protection function is activated, the following data will not be out-
put or output only in part, in OCL output format PC5 and PC4:
• The last four digits of the phone number dialled by the user will be truncated.
• The last four digits of the phone number dialled by the LCR function will be trun-
cated.
• User IDs and PIN codes will not be output.
• User IDs and PIN codes will also be suppressed when the LCR tables are printed
out.
5. 6. 10 Examples of LCR
Fig. 84 1. Example: Network provider B is integrated in the numbering plan of network provider A
Tab. 62 1. Example: Entry in the network provider table
1. Stage:
• The system reaches network provider B via network provider A
• Network provider B seizes and the connection provider B – PBX is set up
Network Pro-
vider
Access
code
Route Barring Conversion rule User ID PIN
Charge code
length
Network
provider B
132 – – EN – – –
QSPWJEFS#
-$3
1#9
/FUXPSL"
6TFSEJBMT
/FUXPSL#


