System Functions and Features as of I7.9
Call routing 173
syd-0200/3.0 – I7.9 – 11.2009
Tab. 44 Setting the routing parameters
5. 5. 3. 3 Call to the public Network via an Operator Console
Dialling via a line key of Company A routes the call via Route 1.
Dialling via a line key of Company B routes the call via Route 2.
5. 5. 3. 4 Call to a virtual Network PISN User
The virtual network PISN user is integrated into the PISN via the public
network. The call to a virtual network PISN user is therefore routed via the public
network.
The PISN user must be created in the internal numbering plan. The caller dials the
PISN user number.
The routing information on the PISN users is allocated to the user configuration
and includes the route to be used and the phone number under which the destina-
tion user can actually be reached (the phone number is indicated without ex-
change access prefix). In the following example the PISN user with phone number
440 can be reached in the public network under phone number 333 33 40.
Parameter Parameter value
Call distribution element 1:
• KT route 1 (route reference number)
Route 1:
• Trunk groups 1 (reference number of one or more trunk group(s))
• Outgoing connections Number of connections allowed simultaneously
• Digit barring Yes (poll digit barring)
• Numbering plan identifier NPI E.164
Trunk group 1:
• Network interfaces Network interfaces of this trunk group
• Network type Public
1)
1)
Not relevant for trunk groups with analogue network interfaces
• Protocol DSS1
1)
To Next Page
Loading...
