System Functions and Features as of I7.9
474 Features
syd-0200/3.0 – I7.9 – 11.2009
8. 7. 12. 2 Opening doors
This function actuates the door opener of any door.
If the TFE is connected via an options card a relay which opens the door is activated
for three seconds.
If the door intercom system is connected via an analogue terminal port the corre-
sponding analogue port is called. When the call is answered by the TFE the config-
ured DTMF characters are transmitted automatically to open the door.
Detailed Description
Tab. 325 Opening doors
Procedures / system configuration for connection via options card
Tab. 326 Opening doors: Procedure
Tab. 327 Opening doors: System configuration
Interface
Operating sequence / signalling on the ter-
minal
Scope
A Once the feature has been activated, the user
obtains the acknowledgement tone.
Requirement:
Authorization is enabled in the user configu-
ration.
*/# procedure
Opening doors *74<Call number of the door intercom>
Parameter Parameter value Scope / remarks
Opening doors Yes Necessary authorisation of the user who wants to
carry out the procedure.
Door intercom system <Call number> The number is defined in the numbering plan.
To Next Page
Loading...
