Aastra Ascotel IntelliGate A150 - Switching Switch Groups

System Functions and Features as of I7.9
Features 469
syd-0200/3.0 – I7.9 – 11.2009
8. 7. 10 Switching switch groups
Switch groups defined in the system configuration can be selected by user A using
switch contacts or a procedure from the terminal. The switchover can also be car-
ried out automatically using time-controlled functions in the System Configuration
(see "Time-controlled functions", page 486)
Fig. 218 Switching switch groups
Detailed Description
Tab. 317 Switching switch groups
Tip:
Identify the significance of the switching states on the labels of the termi-
nals.
Interface
Operating sequence / signalling on the termi-
nal
Scope
A • The user obtains an acknowledgement tone
when switching On / Off.
• Terminals connected to the S-bus cannot dis-
play the status of switching groups 2 to 20.
• System terminals: The switching status is dis-
played by the status of the LED or the corre-
sponding symbol on the display for the func-
tion key configured accordingly.
Possible interfaces:
The switch groups are operated locally on
the system.



6TFSBVUIPSJ[B
UJPO:FT/P
4XJUDIPWFSUP1PT
QFSTXJUDI
HSPVQ
)BSEXBSFJOQVUT
%JTQMBZTUBUVT
-&%PO
0GGJDF
UFSNJOBM
%JTQMBZPOMZJGBGVODUJPO
LFZ'LFZXBTEFGJOFE
SFDPNNFOEFE
4XJUDI
HSPVQ/P
 0GGJDF 'LFZ
 (FOFSBMMZ
 %
 /
 8
 0GGJDF 'LFZ
 (FOFSBMMZ
 YY%
 YY/
 YY8


