System Functions and Features as of I7.9
Features 411
syd-0200/3.0 – I7.9 – 11.2009
8. 6. 14 Leave message
If user B is absent or unobtainable for longer period of time, he can leave a mes-
sage in the PBX for internal users. If user A now calls user B from a system terminal
with display, the PBX will send to A’s display the text left by B.
Fig. 199 Leave message
Detailed Description
Tab. 243 Leave message
If the conditions for user A are not met (A is not an internal user or does not have an
alphanumerical display):
The call is routed to the number of the preconfigured Call Forwarding Uncondi-
tional. If this number is not configured, the call is routed in the normal way to the
user who left the message. The call is stored in the list of callers.
Message:
• The message is either user definable or can be selected from a choice of 16
standard texts (see "Standard texts", page 412).
• The standard texts can be configured to the customer's special requirements.
• The standard texts can be activated with or without additional parameters. Their
length is limited to 160 characters.
Note:
Activating a call forwarding deletes the message.
Interface
Operating sequence / signalling on the termi-
nal
Scope
A Possible interfaces:
internal only
Requirement:
The user is equipped with a digital terminal
with alphanumerical display.
B The user obtains the acknowledgement tone
every time he activates / deactivates the feature.
"
"
!
!
4%84
HAZAAENA
To Next Page
Loading...
