System Functions and Features as of I7.9
Features 387
syd-0200/3.0 – I7.9 – 11.2009
8. 6. 2 Name selection
Instead of entering user B’s phone number, user A can dial user B’s name. The PBX
supports dialling by name and dialling with Quickdial. Please refer to the Operating
Instructions of the system terminals for more details.
Fig. 186 Dialling by name
Tip:
The name of a PISN user can be configured in a PINX user configuration,
provided the user’s number is entered in full (see "Numbering Plan",
page 15).
System configuration
Tab. 209 Dialling by name: System configuration
Tip:
An external directory can also be connected to the PBX via OIP. To browse
the directory, you need to initiate dialling by name with the 0 key or the *-
key.
Interface Scope
ARequirement:
The name must be stored in the caller’s PBX: in the abbreviated dialling list, the phone book,
the UG configuration or the user configuration.
B Possible interfaces:
• Users: internal, external, PISN
• User group (UG)
Parameter
User name, Abbreviated dialling name, PISN user name, User group name
BA
haz0618aaxxa0
"SMITH"
JOHN SMITH
To Next Page
Loading...
