System Functions and Features as of I7.9
Call routing 203
syd-0200/3.0 – I7.9 – 11.2009
System configuration
Tab. 66 Exchange-to-exchange connections: System configuration
5. 7. 1. 3 Possible Exchange-to-Exchange Connections
The following PBX features can be used to set up exchange-to-exchange connec-
tions:
• Call Forwarding Unconditional
• Call Forwarding on No Reply
• Call Deflection
• Switching calls
• Conference circuit
The following tables and examples illustrate which features are available in which
situations.
Parameter Parameter value Remarks
Exchange settings:
• Exchange-to-Exchange
Connection
Not enabled / Digital-digital only /
Digital-analogue also / Analogue-ana-
logue also
Throughout the system
• Disconnect timeout <1...120 minutes> applies only to connection type
Analogue-Analogue
• Wait for connection Yes / No For description see page 327
User settings:
• Exchange-to-Exchange
Connection
Not enabled / Digital-digital only /
Digital-analogue also / Analogue-ana-
logue also / According to exchange set-
tings
Priority over the setting for the sys-
tem as a whole
Abbreviated dialling set-
tings:
• Exchange-to-Exchange
Connection
Yes / No Priority over the exchange setting for
the system as a whole and the user-
specific setting
To Next Page
Loading...
