EasyManua.ls Logo

Aastra Ascotel IntelliGate A150 - Deflecting a Call During the Ringing Phase (CD)

Aastra Ascotel IntelliGate A150
524 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Functions and Features as of I7.9
Features 335
syd-0200/3.0 – I7.9 – 11.2009
8. 4. 4 Deflecting a call during the ringing phase (CD)
Calls intended for B are deflected to destination C during the ringing phase. (CD:
Call Deflection). In such cases the call is not forwarded automatically but manually
by user B. Unlike CFNR the call is signalled only at destination C after it has been
forwarded.
Fig. 169 Forwards a call during the ringing phase
Detailed Description
The response and properties of Call Deflection are similar to those of CFU Uncondi-
tional.
Tab. 150 Call Deflection
Interface
Operating sequence / signalling on the
terminal
Scope
B Once the feature has been activated, B
obtains an acknowledgement indication
on his display.
System terminals (without Office 10) via the
Foxkey
ISDN terminals that support the feature
C Possible destinations:
Users: internal, external
1)
, PISN
Coded ringing
•UG
Requirement:
C is not protected against Call Forwarding Uncon-
ditional (*02).
1)
If caller A is an external user or a virtual network PISN user, the settings authorising exchange-to-exchange
traffic (see "Call Forwarding Unconditional to exchange", page 327) will have to be observed. (If the connec-
tion is not authorized, the call is not forwarded.)
"! #
HAZAAXXB

Table of Contents

Related product manuals