System Functions and Features as of I7.9
334 Features
syd-0200/3.0 – I7.9 – 11.2009
Prefix Dialling Procedures
Tab. 148 Call Forwarding on No Reply: Procedures
System configuration
Tab. 149 Call Forwarding on No Reply: System configuration
Reference to Other Features
*/# procedure
Activate CFNR to user *61 destination No.
Clear CFNR to user: #61
Activate CFNR to user last configured *61#
Clear CFNR to user last configured #61
Activate preconfigured CFNR *62
Clear preconfigured CFNR #62
Activate CFNR to general bell (coded ringing) *68
Clear CFNR to general bell (coded ringing) #68
Protect (own set) against CFNR *02
Allow CFNR (to own set) #02
Parameter Parameter value Remarks
CFNR if busy Yes / No
Preconfigured CFNR <Dest. No.> User configuration
CFU/CFNR destination <Dest. No.> User configuration: Shows the activate destina-
tion. The destination number cannot be altered.
CFU/CFNR type <Call forwarding type> User configuration: Shows the active call forward-
ing type. The call forwarding type cannot be
altered.
CFNR immediate ring Yes / No Valid throughout the system
CFNR forwarding time <3, 5 or 7 rings> Valid throughout the system
Rerouting in the Exchange Yes / No User configuration
Rerouting in the Exchange Yes / No Trunk group configuration
Features:
• "Call Forwarding Unconditional (CFU)", page 324
• "Deflecting a call during the ringing phase (CD)", page 335
To Next Page
Loading...
