System Functions and Features as of I7.9
238 Data services
syd-0200/3.0 – I7.9 – 11.2009
6. 4 User-to-user signalling (UUS)
The service "user-to-user signalling" allows users to exchange a limited volume of
data (128 bytes per user) among themselves over the signalling channel (D chan-
nel) during the phase of connection set-up and clear-down. The exchange of data
takes place even if a call is not answered.
Requirements:
• Both users must have subscribed to the service with the network provider.
• The ISDN terminals or CTI applications used must support the service. System
terminals do not support the service.
Scope
The PBX supports the service in variants 1 and 3 as per ETS 300 286, UUS1.
UUS is not supported in the private leased-line network and is only available at the
PINX which is connected to the public network.
Ascotel® IntelliGate® Net:
UUS is not supported in an AIN. The service is available only at the nodes
that are connected to the public network.
Application examples:
• Message to all callers, stating that the user will only be available again later: User
B → user A
• Reference to a required callback: User A → user B
• Appointment transmission: User A ↔ user B
• Advance transmission of a code word or ID for logging into a system (user B)
from a CTI application: User A → user B
To Next Page
Loading...
