System Functions and Features as of I7.9
350 Features
syd-0200/3.0 – I7.9 – 11.2009
Suffix dialling procedures
Tab. 167 Hold (enquiry call): Procedures
System configuration
Tab. 168 Hold (enquiry call): System configuration
Reference to Other Features
8. 5. 3 Enquiry call with return to initial call
A user (B) can initiate an inquiry call connection during a call (A – B) and as a result
hold a short conversation with another call partner (C), without interrupting the first
connection. The original connection is restored once the enquiry call is completed.
Fig. 176 Enquiry call
System Terminals a/b terminal
Set up internal enquiry call with or without call prepara-
tion
R <user No.>
(R = control key)
Set up enquiry call to a user of the up-circuit PBX
(Condition: The user’s own PBX is analogously
connected down-circuit and the existing call
connection already seizes a trunk line to the up-
circuit PBX)
via function key with function
command "I" to seize the line
(macro "I*42")
R*42 <user No.>
Parameter Parameter value Remarks
Hold in the exchange Yes / No • In the group configuration.
• Local feature does not require a setting
Music on hold No music / External music source /
Internal music source / Hold tone
Throughout the system
Features:
• "Brokering (switching back and forth between two calls)", page 352
• "Enquiry call with return to initial call", page 350
• "Three-party conference from an enquiry call", page 354
• "Call transfer (switching)", page 359
• "Recall", page 364
• "Call acceptance", page 366
A B
C
haz0619aaxxa0
To Next Page
Loading...
