System Functions and Features as of I7.9
Features 473
syd-0200/3.0 – I7.9 – 11.2009
Door bell input on an options card
• The door bell is connected directly to a control input of the options card.
• One internal user can be allocated to the door bell input for each case of the Day,
Night and Weekend positions.
• The dialled destination is dependent on the position of switch group 1 if another
switch group is not assigned to the control input of the option card.
Tab. 324 Door bell on the options card: System configuration
Door bell when the door intercom system is connected via an analogue termi-
nal port
• The destination is configured directly in the connected TFE.
• If the dialled destination depends on the position of a switch group, a CDE call
number must be entered in the TFE.
Prefix Dialling Procedure
Call user: via the door bell.
Ascotel® IntelliGate® Net:
In an AIN the configured destinations must not be on the same node as
the connected door intercom.
Reference to Other Features
Parameter Parameter value Remarks
Door intercom system Destinations <user No.> for switch position <1,2,3>
Features:
• "Opening doors", page 474
• "Dial door intercom", page 476
To Next Page
Loading...
