System Functions and Features as of I7.9
216 Call routing
syd-0200/3.0 – I7.9 – 11.2009
Tab. 74 Routing parameter settings
Parameter Parameter value
Trunk group 1:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Public
• Protocol DSS1
• Direct dialling plan 1 (relevant only if a suitable DD number is found)
• Call Distribution Element 1 (reference number of a call distribution element)
Call distribution element 1:
• Destinations Switch position 1: 330 (PISN user)
• Incoming connections Number of connections allowed simultaneously
User configuration PISN-BN 330:
• Route 2 (route reference number)
• Number Not relevant in this case
Route 2:
• Trunk groups 2 (reference number of one or more trunk group(s))
• Digit barring Use or do not use digit barring
• Outgoing connections Number of connections allowed simultaneously
• Numbering plan identifier NPI PNP
• Type of number TON Unknown
Trunk group 2:
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
To Next Page
Loading...
