System Functions and Features as of I7.9
Call routing 221
syd-0200/3.0 – I7.9 – 11.2009
Tab. 78 Routing parameter settings
Parameter Parameter value
Trunk group 4:
• Network interfaces Network interfaces in this trunk group
• Incoming connection Number of connections allowed simultaneously
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
• Direct dialling plan 1 (relevant only if a suitable DD number is found)
• Call Distribution Element Not relevant to this case
User configuration PISN-BN 330:
• Route 2 (route reference number)
• Number Phone number to be dialled without exchange access prefix
Route 2:
• Trunk group 2 2 (reference number of one or more trunk group(s))
• Digit barring Use or do not use digit barring
• Outgoing connections Number of connections allowed simultaneously
• Numbering plan identifier NPI PNP
• Type of number TON Unknown
Trunk group 2:
• Network interfaces Network interfaces of this trunk group
• Network type Private
• Protocol QSIG or QSIG / PSS1 ISO
To Next Page
Loading...
