System Functions and Features as of I7.9
Call logging (CL) 263
syd-0200/3.0 – I7.9 – 11.2009
Number of output devices
Up to 4 printers or output devices can be connected to the system. Various combi-
nations are possible if more than one printer is connected to the system, for exam-
ple:
• 4 output devices on Pocket Adapters
• 2 printers on Pocket Adapters, 2 printers on the basic system
If only 1 output device is connected, it will carry out all the output jobs. Under nor-
mal circumstances it handles the CL printer jobs for ICL and OCL output. If the out-
put is triggered from somewhere else the output type is altered at short notice. If a
CL printer job is followed by an Event printer job, the new job will be separated by a
line of asterisks *. If the printout of the new job is to begin on a new page, a manual
printer formfeed is to be performed beforehand.
Output when used in a hotel
When determining the output concept, remember to take note of the comments in
"Menu and operating concept with AIMS", page 495.
Setting the page length
In principle, the page length can be set individually for all output types. If, however,
only one output device is connected, the page length set for Service printer output
type will apply.
To Next Page
Loading...
