System Functions and Features as of I7.9
Features 345
syd-0200/3.0 – I7.9 – 11.2009
Detailed Description:
The handset is logged on under System A on its own PBX and under B, C and D on
the other PINX. On each PBX a number is configured under the corresponding
DECT user (Follow Me Number) which is dialled automatically as soon as the hand-
set registers with the system. On a PINX this action activates a diversion from the
handset's own PBX to the system onto which the handset has just registered. If the
handset registers back with its own PBX, the previously activated diversion is deac-
tivated.
Other properties:
• Twin Mode is possible on one’s own PBX
• Not possible in virtual networks
• Possible only with Office 135 and Office 160
Notes:
If the Follow Me Number cannot be dialled when the handset registers
with a system, because the QSIG link is either interrupted or over-
loaded, the handset will be unable to register. It will continue trying
until registration is successful.
With Office 135 and Office 160 "Long-Click 1" switches over only tem-
porarily to manual search of the next system. What is relevant is the
setting in the handset's configuration menu. This prevents accidentally
switching the handset over from Automatic to Manual system search
and therefore unintentionally deactivating DECT Follow Me.
The following configuration option can be used as an alternative to DECT Follow
me in a network with only 2 systems:
To Next Page
Loading...
