System Functions and Features as of I7.9
374 Features
syd-0200/3.0 – I7.9 – 11.2009
The following actions are possible:
• none
The corresponding DTMF character is ignored. With End of greeting = None the
response depends on whether or not a recording after personal greeting is ena-
bled.
• Transfer to call number
The call is transferred to the call number entered in the field Destination. Possible
destinations include:
– internal call numbers
– external call numbers
– user group call numbers
–CDE call numbers
– PISN user numbers
– Abbreviated dialling numbers
Examples of destinations:
– 333: The call is forwarded directly to call number 333.
– N: The caller obtains an internal dial tone and then enters a call number. All
the destinations mentioned above are available to him.
– 42N: The system has already preselected 42. The caller does not obtain a new
dial tone; instead he add further digits.
– K334: The system waits for the terminal PIN (*PIN#) to be entered and after-
wards switches through the call number 334.
Special cases:
– No action is carried out if no call number is entered.
– If an invalid call number is entered, the connection is cleared down.
• Transfer to mailbox
The call is transferred to the user mailbox number entered in the field Destina-
tion. The mailbox’s active greeting is played back directly.
Examples of destinations:
– 444: The activated greeting for the mailbox of user 444 is played back.
– 555G2: Greeting 2 for the mailbox of user 555 is played back.
– NG3: Greeting 3 for the mailbox of the user selected by the caller is played
back.
– K60N: The system waits for the terminal PIN (*PIN#) to be entered and then di-
als 60. The caller completes with further digits.
Special cases:
To Next Page
Loading...
