EasyManua.ls Logo

Aastra Ascotel IntelliGate A150 - Page 381

Aastra Ascotel IntelliGate A150
524 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Functions and Features as of I7.9
Features 381
syd-0200/3.0 – I7.9 – 11.2009
Tab. 203 Procedures personal greetings
Procedures for global greetings
Global greetings are always recorded, monitored, activated and erased using */#
procedures. This requires a special authorization except for monitoring the global
greetings. For this the terminal must be assigned an authorization profile with the
administration right Audio services. Also the terminal PIN must not be set to the ini-
tialization value "0000". The procedure can be operated on any internal terminals
(DTMF / Keypad protocol).
Tab. 204 Procedures for global greetings
*/# procedure
1)
1)
"[ ]" the digits inside the brackets are optional
"nn" stands for the node number. If no node is indicated, the node used is the one corresponding to the ter-
minal with which the procedures are carried out (with IP terminals this is always the Master; with DECT termi-
nals it is the node at which the handset is currently located).
Recording personal greeting x with terminal *913x [*nn] # (x = 1, 2, 3)
To record personal greeting x via PBX audio
input
*923x [*nn] # (x = 1, 2, 3)
Check the recording *#913x [*nn] # or *#923x [*nn] # (x = 1, 2, 3)
Delete the recording #913x [*nn] # or #923x [*nn] # (x = 1, 2, 3)
Activate greeting *933x (x = 1, 2, 3)
Deactivate greeting #933x (x = 1, 2, 3)
x = 1, 2, 3: personal greeting 1, 2, 3
Listening to voice messages *#94 (x = 1, 2, 3)
*/# procedure
1)
1)
"[ ]" the digits inside the brackets are optional
"nn" stands for the node number. If no node is indicated, the node used is the one corresponding to the ter-
minal with which the procedures are carried out (with IP terminals this is always the Master; with DECT termi-
nals it is the node at which the handset is currently located).
Recording global greeting x with terminal *913x [*nn] # (x = 7, 8)
To record global greeting via PBX audio input *923x [*nn] # (x = 7, 8)
Check the recording *#913x [*nn] # or *#923x [*nn] # (x = 7, 8)
Delete the recording #913x [*nn] # or #923x [*nn] # (x = 7, 8)
x = 7: global greeting
x = 8: global overflow greeting

Table of Contents

Related product manuals