System Functions and Features as of I7.9
464 Features
syd-0200/3.0 – I7.9 – 11.2009
Tab. 307 Recording of malicious calls
Tab. 308 Recording of malicious calls: Prerequisites
Suffix dialling procedures
Tab. 309 Recording of malicious calls: Suffix dialling procedures
System configuration
Tab. 310 Recording of malicious calls: System configuration
Reference to Other Features
Interface
Operating sequence / signalling on the ter-
minal
Scope
B Activate during the call / after the call during
the busy tone signalling
1)
.
Network provider confirms activation (the type
of signalling is specific to the network provider)
1)
The duration of the busy tone signalling after the call depends on the network provider.
Internal user
Connection restrictions:
• Only for external incoming connections
• In hands-free mode, activation is practi-
cally possible only during the call as sys-
tem terminals hang up automatically
within a few seconds of the end of the call.
AExternal user
Prerequisites PBX
Technical The PBX must be directly connected with the ISDN network (no support in the private
network)
Terminals:
• System terminals (configurable only with AIMS on the Office 10)
• ISDN terminals
Administrative Must be applied for as a supplementary service from the network provider
Legal A court injunction must be required depending on the legislation in the region con-
cerned
System Terminals ISDN terminal
Activate MCID MCID is available as */# procedure F16#1# in the function
selection list, and can be configured onto a function key
Menu or function key
Parameter Parameter value Remarks
No settings
Features:
• "Identification Elements", page 35
To Next Page
Loading...
