ABB ACQ580 - Page 106

102 Parameters
50 Fieldbus adapter (FBA) Fieldbus communication configuration. 240
51 FBA A settings Fieldbus adapter A configuration. 244
52 FBA A data in Selection of data to be transferred from drive to fieldbus controller
through fieldbus adapter A.
246
53 FBA A data out Selection of data to be transferred from fieldbus controller to drive
through fieldbus adapter A.
246
58 Embedded fieldbus Configuration of the embedded fieldbus (EFB) interface. 247
71 External PID1 Configuration of external PID. 254
76 Multipump configuration Multipump configuration parameters. 256
77 Multipump maintenance
and monitoring
Multipump maintenance and monitoring parameters. 267
80 Flow calculation and
protection
Actual flow calculation. 269
81 Sensor settings Defines the sensor settings for inlet and outlet pressure protection
function.
273
82 Pump protections Settings for quick ramp functions. 274
83 Pump cleaning Settings for the pump cleaning sequence. 277
95 HW configuration Various hardware-related settings. 280
96 System Language selection; access levels; macro selection; parameter
save and restore; control unit reboot; user parameter sets; unit
selection.
281
97 Motor control Switching frequency; slip gain; voltage reserve; flux braking; anti-
cogging (signal injection); IR compensation.
287
98 User motor parameters Motor values supplied by the user that are used in the motor
model.
291
99 Motor data Motor configuration settings. 292
Group Contents Page