ABB ACQ580 - Purpose of the Manual; Contents of this Manual; Related Documents; Start-Up, Control with I;O and

8 Introduction to the manual
Purpose of the manual
This manual provides information needed for designing, commissioning, or operating
the drive system.
Contents of this manual
The manual consists of the following chapters:
• Introduction to the manual (this chapter, page 7) describes applicability, target
audience, purpose and contents of this manual. At the end, it lists terms and
abbreviations.
• Start-up, control with I/O and ID run (page 13) describes how to start up the drive
as well as how to start, change the direction of the motor rotation and adjust the
motor speed through the I/O interface.
• Control panel (page 27) contains instructions for removing and reinstalling the
assistant control panel and briefly describes its display, keys and key shortcuts.
• Default configuration (page 33) contains the connection diagram of the Water
default configuration together with a connection diagram. The predefined default
configuration will save the user time when configuring the drive.
• Program features (page 37) describes program features with lists of related user
settings, actual signals, and fault and warning messages.
• Parameters (page 99) describes the parameters used to program the drive.
• Additional parameter data (page 301) contains further information on the
parameters.
• Fieldbus control through the embedded fieldbus interface (EFB) (page 363)
describes the communication to and from a fieldbus network using the drive
embedded fieldbus interface with the Modbus RTU protocol.
• Fieldbus control through a fieldbus adapter (page 391) describes the
communication to and from a fieldbus network using an optional fieldbus adapter
module
• Fault tracing (page 337) lists the warning and fault messages with possible
causes and remedies.
• Control chain diagrams (page 403) describes the parameter structure within the
drive.
• Further information (inside of the back cover, page 417) describes how to make
product and service inquiries, get information on product training, provide
feedback on ABB Drives manuals and find documents on the Internet.
Related documents
See List of related manuals on page 2 (inside of the front cover).