ABB ACQ580 - Energy Efficiency

Parameters 231
41.46 Set 2 sleep boost
step
See parameter 40.46 Set 1 sleep boost step. 0.0 PID
customer
units
41.47 Set 2 wake-up
deviation
See parameter 40.47 Set 1 wake-up deviation. 0.00 PID
customer
units
41.48 Set 2 wake-up
delay
See parameter 40.48 Set 1 wake-up delay. 0.50 s
41.49 Set 2 tracking mode See parameter 40.49 Set 1 tracking mode. Not selected
41.50 Set 2 tracking ref
selection
See parameter 40.50 Set 1 tracking ref selection. Not selected
41.58 Set 2 increase
prevention
See parameter 40.58 Set 1 increase prevention. No
41.59 Set 2 decrease
prevention
See parameter 40.59 Set 1 decrease prevention. No
41.60 Set 2 PID activation
source
See parameter 40.60 Set 1 PID activation source. On
41.71 Set 2 compensation
input source
See parameter 40.71 Set 1 compensation input source. Set1 output
min
41.72 Set 2 compensation
input 1
See parameter 40.72 Set 1 compensation input 1.
41.73 Set 2 compensated
output 1
See parameter 40.73 Set 1 compensated output 1.
41.74 Set 2 compensation
input 2
See parameter 40.74 Set 1 compensation input 2.
41.75 Set 2 compensated
output 2
See parameter 40.75 Set 1 compensated output 2.
41.76 Set 2 compensation
non-linearity
See parameter 40.76 Set 1 compensation non-linearity.
41.80 Set 2 PID output
min source
See parameter 40.80 Set 1 PID output min source. Set1 output
min
41.81 Set 2 PID output
max source
See parameter 40.81 Set 1 PID output max source. Set1 output
max
41.89 Set 2 setpoint
multiplier
See parameter 40.89 Set 1 setpoint multiplier.1.00
41.90 Set 2 feedback
multiplier
Defines the multiplier k used in formulas of parameter 41.10
Set 2 feedback function. See parameter 40.90 Set 1 feedback
multiplier.
1.00
45
45 Energy efficiency
Settings for the energy saving calculators as well as peak and
energy loggers.
See also section Energy saving calculators (page 92).
45.01 Saved GW hours Energy saved in GWh compared to direct-on-line motor
connection. This parameter is incremented when 45.02
Saved MW hours rolls over.
This parameter is read-only (see parameter 45.21 Energy
calculations reset).
-
0…65535 GWh Energy savings in GWh. 1 = 1 GWh
No. Name/Value Description Def/FbEq16