ABB ACQ580 - Layout of the Control Panel

28 Control panel
To reinstall the control panel, put the bottom of the container in position (1a), press
the retaining clip at the top (1b) and push the control panel in at the top edge (1c).
Layout of the control panel
1 Layout of the control panel display 6 The arrow keys
2 Left softkey 7 Off (see Hand, Off and Auto)
3 Right softkey 8 Hand (see Hand, Off and Auto)
4 Status LED, see chapter Maintenance
and hardware diagnostics, section
LEDs in the Hardware manual of the
drive.
9 Auto (see Hand, Off and Auto)
5 Help 10 USB connector
1a
1b
1c
4
3
6
7 8
5
10
2
9
1