ABB ACQ580 - Page 332

328 Additional parameter data
71.06 PID status word PB 0000h…FFFFh - 1 = 1
71.07 PID operation mode List 0…2 - 1 = 1
71.08 Feedback 1 source Analog
src
--1 = 1
71.11 Feedback filter time Real 0.000…30.000 s 1000 = 1 s
71.14 Setpoint scaling Real -200000.00…200000.00 - 100 = 1
71.15 Output scaling Real -200000.00…200000.00 - 100 = 1
71.16 Setpoint 1 source Analog
src
--1 = 1
71.19 Internal setpoint sel1 Binary
src
--1 = 1
71.20 Internal setpoint sel2 Binary
src
--1 = 1
71.21 Internal setpoint 1 Real -200000.00…200000.00 PID
customer
units
100 = 1 PID
customer unit
71.22 Internal setpoint 2 Real -200000.00…200000.00 PID
customer
units
100 = 1 PID
customer unit
71.23 Internal setpoint 3 Real -200000.00…200000.00 PID
customer
units
100 = 1 PID
customer unit
71.26 Setpoint min Real -200000.00…200000.00 - 100 = 1
71.27 Setpoint max Real -200000.00…200000.00 - 100 = 1
71.31 Deviation inversion Binary
src
--1 = 1
71.32 Gain Real 0.10…100.00 - 100 = 1
71.33 Integration time Real 0.0…9999.0 s 10 = 1 s
71.34 Derivation time Real 0.000…10.000 s 1000 = 1 s
71.35 Derivation filter time Real 0.0…10.0 s 10 = 1 s
71.36 Output min Real -200000.00…200000.00 - 10 = 1
71.37 Output max Real -200000.00…200000.00 - 10 = 1
71.38 Output freeze enable Binary
src
--1 = 1
71.39 Deadband range Real 0.0…200000.0 - 10 = 1
71.40 Deadband delay Real 0.0…3600.0 s 10 = 1 s
71.58 Increase prevention Binary
src
--1 = 1
71.59 Decrease prevention Binary
src
--1 = 1
71.62 Internal setpoint actual Real -200000.00…200000.00 PID
customer
units
100 = 1 PID
customer unit
No. Name Type Range Unit FbEq32