ABB ACS560 - BREL-01 Relay Output Extension Module; CDPI-02 Panel Bus Adapters; Contents of this Chapter; Installing Assistant or Basic Control Panel on the Cabinet Door

X101
RJ-45/Ethernet cable
1
4
5
3
2
RDUM-01
Drive
￭
Installing assistant or basic control panel on the cabinet door
The basic panel or assistant control can be connected to the cabinet door using
the screw inserts available behind the control panel.
For better aesthetics and convenience, you can install DPMP-02 surface mounting
platform or DPMP-01 flush mounting panel on the cabinet door and then install
the basic or assistant control panel. You can order DPMP-02 and DPMP-01 from
ABB.
CDPI-02 panel bus adapters
The CDPI-02 panel bus adapters can be used to connect a remote ACx-AP-x control
panel to the drive, or to chain the control panel or a PC to several drives on a panel
bus. For more information, see CDPI-01/-02 communication adapter module user's
manual (3AXD50000009929 [English]).
BREL-01 relay output extension module
￭
Contents of this chapter
This chapter contains a description and technical data of the optional BREL-01
relay output extension module.
￭
Safety instructions
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or
death, or damage to the equipment can occur.
Optional panel bus adapters and extension modules 227