ABB ACS560 - Installing the Drive Horizontally Side by Side; Installing the Drive Vertically Side by Side

4
5
× 2 × 2
M8
3
2
6. Remove the front cover as follows:
• Remove the fastening screws (a).
• Move the cover to the top side and then up.
Mechanical installation 51
6. Remove the front cover as follows:
• Remove the fastening screws (a).
• Move the cover to the top side and then up.
 Installing the drive vertically side by side
Install the drive following the steps in the appropriate section Installing the drive
vertically, frames size R0…R2 (on page 47), Installing the drive vertically, frame size
R3...R4 (on page 49) or Installing the drive vertically, frames size R5…R8 (on page
50).
Flange mounting
Instructions for flange mounting are delivered with the flange mounting kit: Flange
mounting quick guide for frames R6 to R8 (3AXD50000019099 [English]). For more
information on flange mounting, see Flange mounting supplement
(3AXD50000019100 [English]).
6a
6a
Mechanical installation 51
6. Remove the front cover as follows:
• Remove the fastening screws (a).
• Move the cover to the top side and then up.
 Installing the drive vertically side by side
Install the drive following the steps in the appropriate section Installing the drive
vertically, frames size R0…R2 (on page 47), Installing the drive vertically, frame size
R3...R4 (on page 49) or Installing the drive vertically, frames size R5…R8 (on page
50).
Flange mounting
Instructions for flange mounting are delivered with the flange mounting kit: Flange
mounting quick guide for frames R6 to R8 (3AXD50000019099 [English]). For more
information on flange mounting, see Flange mounting supplement
(3AXD50000019100 [English]).
6a
6a
6a
6a
￭
Installing the drive vertically side by side
Install the drive following the steps in the appropriate section Installing the drive
vertically, frames R0…R2 (page 61), Installing the drive vertically, frames
R3...R4 (page 62) or Installing the drive vertically, frames R5…R8 (page 63).
￭
Installing the drive horizontally side by side
Install the drive following the steps in the appropriate section Installing the drive
vertically, frames R0…R2 (page 61), Installing the drive vertically, frames
R3...R4 (page 62) or Installing the drive vertically, frames R5…R8 (page 63).
Mechanical installation 65