Mounting option
For information on mounted optional modules, see Installing option
modules (page 116):
Control panel
The drive supports these control panels:
• ACS-AP-S
• ACS-AP-I
• ACS-AP-W
• ACS-BP-S
• RDUM-01 blank panel with RJ-45 connector.
• CDPI-02 panel bus adapter
For information on RDUM-01 blank panel, see RDUM-01 blank control
panel (page 225).
For information on assistant control panel, see
ACS-AP-X assistant control panels
user’s manual
(3AUA0000085685 [English]) and for basic control panel, see
ACS-BP-S basic control panel’s user’s manual (3AXD50000032527 [English]).
To remove the control panel, press the retaining clip at the top (1a) and pull it
forward from the top edge (1b).
To reinstall the control panel, put the bottom of the container in position (1a),
press the retaining clip at the top (1b) and push the control panel in at the top
edge (1c).
Operation principle and hardware description 45
To Next Page
Loading...
