DescriptionTerm/
Abbrevi-
ation
Converts direct current and voltage to alternating current and voltage.Inverter
A pre-defined set of default values of parameters in a drive control program.Macro
Remote monitoring toolNETA-21
With fieldbus protocols based on the Common Industrial Protocol (CIPTM),
such as DeviceNet and Ethernet/IP, denotes the control of the drive using
the Net Ctrl and Net Ref objects of the ODVA AC/DC Drive Profile. For more
information, see www.odva.org.
Network
control
In the drive control program, user-adjustable operation instruction to the
drive, or signal measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed as an
object. For example, variable, constant, or signal.
Parameter
Programmable logic controllerPLC
Optional blank control panel coverRDUM-01
Converts alternating current and voltage to direct current and voltageRectifier
I/O & EIA-485 moduleRIIO-01
Safe torque off (IEC/EN 61800-5-2)STO
Related documents
Code (Hindi)Code (English)Manual
Drive manuals and guides
3AXD500000458873AXD50000044997
ACS560 standard control program firmware manual
3AXD500000458883AXD50000044998
ACS560 (0.75 to 160 kW, 1.0 to 215 hp) hardware
manual
(Multilingual)3AXD50000042620
ACS560 drives quick installation and start-up guide
Option manuals and guides
3AUA0000085685
ACS-AP-x assistant control panels user’s manual
3AXD50000032527
ACS-BP-S basic control panels user’s manual
3AXD50000009929
CDPI-01/-02 communication adapter module user's
manual
3AUA0000100140
DPMP-01 mounting platform for ACS-AP control panel
3AUA0000136205
DPMP-02/03 mounting platform for ACS-AP control
panel
Introduction to the manual 27
To Next Page
Loading...
